The diagnostic scope can include vent temperature, airflow, controls, leak checks and refrigerant or coolant-system assessment. Confirm the vehicle's refrigerant type, required equipment and approved compressor oil before booking refrigerant work. In-shop service capabilities and repair inclusions must be confirmed for the exact vehicle.
Warm air, short cooling cycles, or rapid temperature swings usually mean low refrigerant or a leak. We scan, leak-test, and only recharge once we confirm it’s safe.
Common causes: low refrigerant from a leak, a failing compressor, clogged condenser, bad pressure sensor, or a stuck blend door. We pinpoint it with diagnostics before repairs.
WhatsApp Quick Quote
Likely culprits: low coolant, stuck thermostat, clogged heater core, air pocket in the cooling system, or a faulty blend door actuator. We pressure-test and inspect coolant flow.
Typically 45–90 minutes for a standard test and recharge. Complex leaks or component replacements may take longer—your advisor will confirm timing the same day.
R-134a and R-1234yf systems require the correct refrigerant-specific recovery/recharge equipment and application-approved oil; the refrigerants must not be mixed. Send the vehicle details to confirm whether the required service is available in-house or needs a specialist referral.
A/C & heating repairs require in-shop equipment. We don’t do mobile HVAC, but we can help with towing or roadside battery boosts if needed.
A quick annual check is smart. For high-mileage or rideshare vehicles, test before summer and again pre-winter.
Yes. Low coolant or a stuck thermostat prevents hot coolant from reaching the heater core. We test for leaks and thermostat performance.
Yes—diagnostics cover blower motors, resistors, relays, fuses, and control modules. We’ll repair what’s needed, nothing you don’t.
Absolutely. Restricted airflow reduces cooling/heating efficiency and can strain the blower. We check and replace as needed.
Possible causes include refrigerant leaks, lubrication problems, contamination, restriction or electrical faults. Diagnose the failure before replacing parts. Flushing, receiver-drier/accumulator replacement, oil type/quantity and charge mass must follow the vehicle and component procedures; not every component or system can be flushed.
Both. Defrost uses the A/C to dehumidify and the heater for warmth. We test blend doors, A/C function, and coolant temp to restore clear glass fast.
Call +1 (647) 809-9631 or tap WhatsApp Quick Quote
Record cooling, heating or defrosting symptoms and when they occur. Separate the diagnostic work from any proposed repair and broader seasonal checks.
Have your vehicle, tire size or symptoms ready. Confirm the quote and appointment with the North York shop.
Call 647-809-9631 with your vehicle and the tire or service work needed. Prefer a message? Use the form below. Confirm the assessment, quote and appointment before visiting; mobile tire work also requires coverage and access confirmation.