Professional tire mounting & dynamic balancing for a smooth, quiet ride. TPMS service, hub‑centric rings, torque to spec & road‑force options—done right at our Toronto shop.
Why Masterdrive? Same‑day availability | Fair pricing | Technician‑level care
Professional mounting/dismounting, bead seating with proper lube, new valve stem (as needed), TPMS health check, dynamic balance, inflation to door-placard PSI, and torque to OEM spec. Book now: Call +1 (647) 809-9631 or WhatsApp Quick Quote.
Typical four-tire mount & balance takes 45–90 minutes depending on wheel size, tire type, and TPMS service.
Static (single-plane) corrects vertical hop; dynamic (two-plane) corrects hop + side-to-side wobble. We use dynamic balancing for smooth highway ride.
Road force balancing measures tire/wheel stiffness under load to detect hard spots or out-of-round issues. We recommend it for persistent vibrations or performance/low-profile setups.
Yes—performance, SUV, and run-flat tires up to 22″ with rim-safe tools, nylon heads, and proper bead lubrication to protect your wheels.
Absolutely—EVs are heavier and need precise torque and correct PSI for range. We can also recommend EV-rated tires for reduced noise and wear.
We’ll check for lateral/radial runout. Minor bends may be repairable; severe issues require wheel replacement. Out-of-round tires may need road force match-mounting or replacement.
Rubber stems age and crack; aluminum TPMS valves need periodic seal/washer kits to prevent leaks and corrosion. We’ll recommend what’s needed at install.
Yes—ID relearn, sensor cloning when appropriate, and warning light reset. We stock common sensors and service kits.
Use the door placard/OEM spec for size, load index, and speed rating. We’ll confirm fitment and discuss driving needs before installation.
Yes—we torque to spec during install and recommend a re-torque after 50–100 km (free). It helps protect studs and ensure even clamping.
Not always—but if you notice pulling, uneven wear, or had suspension work, an alignment protects your investment and keeps the steering straight.
Possible bent wheel, tire road-force variation, worn suspension, or hub rust. We’ll inspect and, if needed, perform road force balance or alignment.
Yes—we’ll verify size, load/speed rating, condition, and DOT date. Mounting fees vary by wheel size and tire type.
Rim guards/nylon heads, proper bead lube, correct arm placement, and careful valve stem/TPMS handling. We treat each wheel like it’s ours.
Pricing depends on wheel size, tire type (run-flat/low-profile), TPMS work, and balancing method. Get quote: Call +1 (647) 809-9631 or WhatsApp Quick Quote.
Yes—used tires are recycled through approved programs. Disposal fees are transparent on your invoice.
Card/tap and e-transfer are available. You’ll receive a digital invoice for your records.
Toronto, North York, Etobicoke, Scarborough, York, Mississauga, Brampton, Vaughan, Markham, Richmond Hill. Our shop: 22 Ingram Drive, Unit 2, Toronto, ON M6M 2L6.
Book now: Call +1 (647) 809-9631 or WhatsApp Quick Quote. Share your tire size (e.g., 235/45R18) and preferred time; we’ll schedule you in.
Describe the issue, vehicle, and timing; we’ll schedule in-shop or mobile same day.
